channel-utilization start-threshold
Function
The channel-utilization start-threshold command sets the start threshold for static load balancing based on the channel usage.
The undo channel-utilization start-threshold command restores the default start threshold for static load balancing based on the channel usage.
By default, the start threshold for static load balancing based on the channel usage is 50%.
Usage Guidelines
Usage Scenario
After the start threshold is configured for static load balancing based on the channel usage, an AP calculates the channel usage of the radio with which a STA associates when the STA requests to connect to the AP. If the channel usage does not exceed the start threshold, the STA access is permitted. If the channel usage exceeds the start threshold, the AP calculates the load difference for static load balancing based on the channel usage. You can run the channel-utilization gap-threshold command to configure the load difference threshold for static load balancing based on the channel usage.
