reset ospfv3 suppress-flapping peer
Function
The reset ospfv3 suppress-flapping peer command forces an interface to exit from OSPFv3 neighbor relationship flapping suppression.
Format
reset ospfv3 process-id suppress-flapping peer [ interface-type interface-number ] [ notify-peer ]
Parameters
| Parameter | Description | Value |
|---|---|---|
| process-id | Specifies the ID of an OSPFv3 process. | The value is an integer ranging from 1 to 4294967295. |
| interface-type interface-number | Specifies an interface type and number. | - |
| notify-peer | Instructs neighbors to exit from OSPFv3 neighbor relationship flapping suppression too. | - |
Usage Guidelines
Interfaces exit from flapping suppression in the following scenarios:
- The suppression timer expires.
- The corresponding OSPFv3 process is reset.
- An OSPFv3 neighbor is reset using the reset ospfv3 command.
- The reset ospfv3 suppress-flapping peer command is run.
- OSPFv3 neighbor relationship flapping suppression is disabled globally using the suppress-flapping peer disable (OSPFv3) command in the OSPFv3 view.
If notify-peer is specified when the reset ospfv3 suppress-flapping peer command is run on a device, the device sends Hello packets in which HelloInterval and RouterDeadInterval are 0s to its neighbors to instruct the neighbors to exit from OSPFv3 neighbor relationship flapping suppression too. If the neighbors fail to receive such Hello packets, the function of notify-peer does not take effect. To force the neighbors to exit from OSPFv3 neighbor relationship flapping suppression, run the reset ospfv3 suppress-flapping peer command on them.
