No relevant resource is found in the selected language.
Your browser version is too early. Some functions of the website may be unavailable. To obtain better user experience, upgrade the browser to the latest version.
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
set power manage mode
set power manage mode
Function
The set power manage mode command sets
the energy-saving mode of the device.
By default, the standard
energy-saving mode is used.
This command is supported only by the AC6605 and AC6805.
Format
set power manage modemode-id
Parameters
Parameter
Description
Value
mode-id
Specifies the energy-saving mode of the device.
The value is an integer that ranges from 1 to 4:
1: indicates the user-defined energy-saving mode.
2: indicates the standard energy-saving mode.
3: indicates the basic energy-saving mode.
4: indicates the deep energy-saving mode.
Views
System view
Default Level
2: Configuration level
Usage Guidelines
The set power manage mode command sets the energy-saving
mode of the device.
The device supports the following
energy-saving modes:
User-defined mode: Users set the energy-saving mode as service
requires.
Standard mode: Factory mode and default power saving mode.
Basic energy saving mode: Components not in use are shut down
or switched to the dormant state. This mode reduces the system response
speed when new services are configured or new users go online.
Deep mode: Components not in use are shut down or switched
to the dormant state. This mode adjusts the power consumption dynamically
according to the actual situation of services.
Example
# Set the energy-saving mode of the device to basic.
<AC6605> system-view
[AC6605] set power manage mode 3
