Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display telnet-client
Function
The display telnet-client command displays the source parameters when the device works as a Telnet client.
Usage Guidelines
After setting source parameters of the Telnet client, you can run this command to check the setting result. If you have not set telnet client-source, the default source IP address is 0.0.0.0.
