Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
mld-snooping enable (AP wired port profile view)
Usage Guidelines
Usage Scenario
MLD snooping is a basic IPv6 Layer 2 multicast function that forwards and controls multicast traffic at the data link layer. MLD snooping runs on a Layer 2 device and analyzes MLD messages exchanged between a Layer 3 device and hosts to set up and maintain a Layer 2 multicast forwarding table. The Layer 2 device forwards multicast packets based on the Layer 2 multicast forwarding table.
Prerequisites
An AP wired port profile has been created.
Precautions
The AP wired interfaces added to an Eth-trunk interface do not support this function.
