Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
site
Parameters
Parameter |
Description |
Value |
|---|---|---|
code code |
Specifies the code of a WLAN access site. |
The value is a string of 14 characters. The range of each digit is as follows:
|
Usage Guidelines
Usage Scenario
As defined in the Specifications for Wireless Access Site Functions of the Wireless Internet Access Security System in Public Places, AP information needs to be reported to the background management system for wireless Internet access security in public places. In this case, you can configure a WLAN access site for an AP.
Running this command in the AP view configures a WLAN access site for a single AP, while running this command in the AP group view configures a WLAN access site for all APs in an AP group.
Follow-up Procedure
Run the report enable command to enable the function of reporting WLAN access site information.
