Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ap modify
Usage Guidelines
Usage Scenario
When AP hardware needs to be replaced, you can change the MAC address of the AP to that of a new AP to prevent repetitive data configurations. After the change, the new AP goes online using the ID of the original AP, and all data configurations of the original AP take effect on the new AP.
By default, you can run the display ap { all | ap-group ap-group } command to check the MAC address of an AP.
Precautions
Replacing an AP enables the new AP to go online on the AC but will interrupt services of the original AP.
Related Topics
