sta-load-balance dynamic deauth-fail-times
Function
The sta-load-balance dynamic deauth-fail-times command sets the maximum number of attempts to migrate STAs in deauthentication mode.
The undo sta-load-balance dynamic deauth-fail-times command restores the default maximum number of attempts to migrate STAs in deauthentication mode.
By default, the maximum number of attempts to migrate STAs in deauthentication mode is 2.
Format
sta-load-balance dynamic deauth-fail-times deauth-fail-times
undo sta-load-balance dynamic deauth-fail-times
Usage Guidelines
Usage Scenario
The device attempts to use the 802.11v and deauthentication modes to trigger STA migration to the target AP. Due to differences of STAs, some STAs can be successfully migrated in deauthentication mode after multiple attempts. You can run the sta-load-balance dynamic deauth-fail-times command to set the maximum number of attempts to migrate STAs in deauthentication mode. If the number of attempts exceeds the specified value, STAs cannot be migrated.
Precautions
You are advised to retain the default value. If the success rate of STA migration in deauthentication mode is low or STA services are affected, set the parameter value to 0 to disable STA migration in deauthentication mode.
This command is valid only in sta-number mode.
