display ospf vlink
Parameters
| Parameter | Description | Value |
|---|---|---|
| process-id | Specifies the ID of an OSPF process. | The value is an integer ranging from 1 to 65535. |
Example
# Display OSPF virtual links.
<AC6605> display ospf vlink
OSPF Process 1 with Router ID 1.1.1.1
Virtual Links
Virtual-link Neighbor-id -> 2.2.2.2, Neighbor-State: Full
Interface: 10.1.1.1 (Vlanif100)
Cost: 1 State: P-2-P Type: Virtual
Transit Area: 0.0.0.1
Timers: Hello 10 , Dead 40 , Retransmit 5 , Transmit Delay 1
GR State: Normal
Item |
Description |
|---|---|
Virtual-link Neighbor-id |
ID of the neighboring wireless access controller that is connected through the virtual link |
Neighbor-State |
Neighbor status, such as Down, Init, 2-Way, ExStart, Exchange, Loading, and Full |
Interface |
Information about interfaces in the area, that is, IP address and name of the primary interface (If the interface is a serial interface, Unknown is displayed.) |
Cost |
Cost |
State |
Interface status |
Type |
Interface type |
Transit Area |
Transit area ID if the current interface is a virtual link |
Timers |
Information about the following items: the interval for sending Hello messages, Dead time, retransmission interval, and transmission delay on the interface |
GR State |
GR status
|
