Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display patch-information
Function
The display patch-information command displays information about the current patch package in the system.
Usage Guidelines
After a patch is loaded or deleted, run this command to view information about the patch package, including its version, name.
Example
# Display information about the current patch package.
<AC6605> display patch-information Patch Package Name : flash:/patch.pat Patch Package Version : V200R010C00SPH The current state is:Running ****************************************************************** * The patch information, as follows * ****************************************************************** Type State Count Time(YYYY-MM-DD HH:MM:SS) ------------------------------------------------------------------ VRP Running 1 2020-07-04 18:51:04+00:00
Table 2-45 Description of the display patch-information command output
Item |
Description |
|---|---|
Patch Package Name |
Name of the running patch package. |
Patch Package Version |
Version of the running patch package. |
The current state is |
State of the running patch package. |
Type |
Patch type. |
State |
Running status of the patch. (Running: The patch is running.) |
Count |
Number of patches of each type in the system. |
Time |
Activation time of patches of each type in the system. |
