Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
poe enable
Function
The poe enable command enables the PoE function on an interface.
The undo poe enable command disables the PoE function on an interface.
By default, the PoE function is enabled on an interface.
Usage Guidelines
Before providing power for the PD connected to the interface, ensure the PoE function on the interface is enabled. IF the PoE function is not enabled, run the poe enable command to enable the PoE function on the interface.
In automatic mode, the power-on and power-off of interfaces are determined by the PoE power and interface power priority. When the PoE power is sufficient, the device does not power off one interface. To stop providing power for one PD, run the undo poe enable command.
Related Topics
