energy-efficient-ethernet enable
Function
The energy-efficient-ethernet enable command enables the Energy Efficient Ethernet (EEE) function on an electrical interface.
The undo energy-efficient-ethernet enable command disables the EEE function on an electrical interface.
By default, EEE is disabled on an electrical interface.
The AC6800V and ACU2 do not support this command.
Usage Guidelines
Usage Scenario
The system provides power for each interface. Even though an interface is idle, it consumes the same power as working interfaces. The energy-efficient-ethernet enable command enables the system to reduce the power on an interface when the interface is idle and restore the power when the interface starts to transmit data. This reduces system power consumption.
Prerequisites
If an electrical interface works in non-auto negotiation mode, run the negotiation auto command to enable auto-negotiation.
Precautions
The EEE function can be configured only on electrical interfaces. Optical interfaces or combo interfaces do not support the EEE function.
An electrical interface that works at a rate of 10 Mbit/s cannot be configured with the EEE function.
