Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ospfv3 mib-binding
Function
The ospfv3 mib-binding command binds an OSPFv3 process to SNMP and makes OSPFv3 respond to SNMP requests.
The undo ospfv3 mib-binding command disables the binding.
By default, there is no binding between the OSPFv3 process and SNMP.
Parameters
| Parameter | Description | Value |
|---|---|---|
| process-id | Specifies the OSPFv3 process ID. | The value ranges from 1 to 65535. |
Usage Guidelines
When multiple OSPFv3 processes are enabled, you can bind OSPFv3 MIB to a process so that this process can be processed.
Before running this command, run the ospfv3 command in the system view to create an OSPFv3 process.
Only
after the ospfv3 mib-binding process-id command is run on a device,
can the trap associated with the specified process ID be triggered
on the device.
