Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
pim
Function
The pim command displays the PIM view.
The undo pim command clears the configuration in the PIM view.
Usage Guidelines
Usage Scenario
Before performing PIM configurations, run the pim command to enter the PIM view.
Prerequisites
IP multicast routing has been enabled using the multicast routing-enable command.
Precautions
In using the undo pim command, enter Y or N to confirm the action. This command clears global IPv4 PIM configurations in the current instance. Use this command with caution.
