Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display debugging
Function
The display debugging command displays debugging messages allowed to be sent by the device.
Parameters
| Parameter | Description | Value |
|---|---|---|
| interface interface-type interface-number | Specifies the interface type and number. | - |
| module-name | Displays debugging messages sent by a specified module such as the DHCP module. If this parameter is not specified, all debugging messages allowed to be sent are displayed. | Enumerated type. The value depends on the registered module. |
Usage Guidelines
Usage Scenario
Debugging affects device performance. The display debugging command displays debugging messages allowed to be sent by the AC.
Prerequisites
By default, sending debugging messages is prohibited. The debugging of a specified module has been enabled.
Example
# Display debugging messages allowed to be sent by the AC.
<AC6605> debugging acl4 all <AC6605> display debugging ACL4 event debugging switch is on ACL4 packet debugging switch is on
# Display debugging messages allowed by the ARP module.
<AC6605> display debugging arp
slot[0]:ARP packet debugging is on
