Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display arp anti-attack gateway-duplicate item
Function
The display arp anti-attack gateway-duplicate item command displays ARP gateway anti-collision entries.
Only the AC6605 supports this function.
Usage Guidelines
After ARP gateway anti-collision is enabled, you can run this command to view ARP anti-collision entries.
Example
# Display ARP gateway anti-collision entries.
<AC6605> display arp anti-attack gateway-duplicate item
interface IP address MAC address VLANID aging time
-------------------------------------------------------------------------------
GigabitEthernet2/0/0 10.1.1.1 0000-0000-0002 2 150
GigabitEthernet2/0/1 10.1.1.2 0000-0000-0004 2 170
-------------------------------------------------------------------------------
The number of record(s) in gateway conflict table is 2
Table 24-94 Description of the display arp anti-attack gateway-duplicate item command output
Item |
Description |
|---|---|
interface |
Inbound interface of ARP packets. |
IP address |
IP address of the gateway. |
MAC address |
Source MAC address of ARP packets. |
VLANID |
VLAN ID of ARP packets. |
aging time |
Aging time of entries. |
Related Topics
