Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display local-access-code
Parameters
Parameter |
Description |
Value |
|---|---|---|
| description description | Displays information about the local access code with the specified description. |
The value is a string of 1 to 16 case-sensitive characters without spaces and question marks (?). |
| expired | Displays information about expired local access codes. |
- |
| unexpired | Displays information about unexpired local access codes. |
- |
Usage Guidelines
After the local-access-code command is executed, you can run the display local-access-code command to view local access code information.
Example
# Display local access code information.
<AC6605> display local-access-code
------------------------------------------------------------------------------------
Access-code Description State Date Time
------------------------------------------------------------------------------------
Aa****aa Unexpired 2018-12-20 12:00:00
aa****aa AAaa Unexpired 2018-12-20 12:00:00
------------------------------------------------------------------------------------
Total 2 access code(s)
Table 24-13 Description of the display local-access-code command output
| Item | Description |
|---|---|
| Access-code | Local access code. To configure a local access code, run the local-access-code command. |
| Description | Description of a local access code. To configure the description of a local access code, run the local-access-code command. |
| State | Status of a local access code:
|
| Date | Date when a local access code will expire. To configure the date, run the local-access-code command. |
| Time | Time when a local access code will expire. To configure the time, run the local-access-code command. |
| Total n access code(s) | Total number of local access codes. |
