Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display snmp-agent mib-view
Parameters
| Parameter | Description | Value |
|---|---|---|
| view-name | Specifies the view to be displayed. This parameter can be set using the snmp-agent mib-view command. | It is a string of 1 to 32 case-sensitive characters without spaces. |
Usage Guidelines
Usage Scenario
The snmp-agent mib-view command creates or updates a MIB view. To check the default and configured MIB view, you can run the display snmp-agent mib-view command.
By default, the view ViewDefault is adopted.
Precautions
Before running the display snmp-agent mib-view command, ensure that the SNMP agent has been enabled.
Example
# Display the current MIB view.
<AC6605> display snmp-agent mib-view
View name:ViewDefault
MIB subtree:internet
Subtree mask:
Storage type: nonVolatile
View type:included
View status:active
Total number is 1
Table 26-5 Description of the display snmp-agent mib-view command output
Item |
Description |
|---|---|
View name |
View name. |
MIB subtree |
MIB subtree. |
Subtree mask |
Subtree mask. |
Storage type |
Data storage type.
NOTE:
At present, only nonVolatile is available. |
View type |
Type of a view. The options are as follows:
|
View status |
Indicates the status of the MIB view. |
Total number |
Total number of views whose information is queried. |
Related Topics
