Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
info-center rate-limit global-threshold
Function
The info-center rate-limit global-threshold command sets the total number of logs that the information center can process every second.
The undo info-center rate-limit global-threshold command restores the default value.
By default, the information center processes a maximum of 400 logs in every second.
Parameters
| Parameter | Description | Value |
|---|---|---|
| value | Specifies the maximum number of logs that the information center can process every second. | The value is an integer that ranges from 100 to 1000. The default value is 400. |
Usage Guidelines
You can run the info-center rate-limit global-threshold command to set the maximum number of logs that the information center can process every second. This can adjust the processing capability of the information center. If the number of logs to be processed exceeds the processing capability of the information center, the extra logs are discarded.
- If the threshold is too low, some logs may be discarded.
- If the threshold is too high, the information center cannot identify the log ID under which too many logs are generated. The number of logs to be processed depends on the current processing capacity of the information center.
