peer-ap mac (WDS whitelist profile view)
Function
The peer-ap mac command adds MAC addresses of neighboring APs that are allowed to connect to an AP to a WDS whitelist profile.
The undo peer-ap mac command deletes the MAC addresses of neighboring APs from a WDS whitelist profile.
By default, no MAC address of a neighboring AP is added to a WDS whitelist profile.
Usage Guidelines
Usage Scenario
After a WDS whitelist profile is created, you can run the peer-ap mac command to add neighboring APs' MAC addresses to the profile.
If a WDS whitelist profile is bound to a WDS profile, only APs with MAC addresses in the WDS whitelist profile can access the local AP, and other APs are denied access.
Precautions
A maximum of six MAC addresses can be added to a WDS whitelist profile.
Example
# Create the WDS whitelist profile whitelist and add the MAC address 0001-0001-0001 to the whitelist profile. Bind the WDS whitelist profile whitelist to radio 0 of APs in the AP group group1.
<AC6605> system-view [AC6605] wlan [AC6605-wlan-view] wds-whitelist-profile name whitelist [AC6605-wlan-wds-whitelist-whitelist] peer-ap mac 0001-0001-0001 [AC6605-wlan-wds-whitelist-whitelist] quit [AC6605-wlan-view] ap-group name group1 [AC6605-wlan-ap-group-group1] radio 0 [AC6605-wlan-group-radio-group1/0] wds-whitelist-profile whitelist
