Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
poe force-power (AP wired port link profile view)
Usage Guidelines
Usage Scenario
After this function is configured, an interface forcibly powers on the connected PD even if the PSE cannot identify the PD. Before powering on the interface, ensure that the system power is sufficient.
Precautions
If a PoE interface connects to a non-PoE device, do not use this command.
This command takes effect only on the AP2051DN-E, R251D-E, AP8082DN, AP8182DN, AP4050DN-E, AP4050DN-HD, AP7050DN-E, AP2050DN-E, R250D-E, AD9431DN-24X, AD9430DN-24, and AD9430DN-12.
Related Topics
