Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
local-id
Function
The local-id command specifies the local ID for IKE negotiation.
The undo local-id command deletes the local ID for IKE negotiation.
By default, the local ID is not configured for IKE negotiation.
Parameters
| Parameter | Description | Value |
|---|---|---|
| id | Specifies the local ID used in IKE negotiation | The value is a string of 1 to 255 case-sensitive characters. It cannot contain question marks. |
Usage Guidelines
If the ID type of the IKE peer is FQDN or USER-FQDN, you can configure the local end identity in the system view or IKE peer view.
The local-id command sets an ID, indicating that the IKE peer uses this ID for authentication. The ike local-name command sets an ID, indicating that all peers on the device use this ID for authentication. The ID specified by the local-id command has a higher priority than the one specified by the ike local-name command.
