Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display flow-suppression interface
Function
The display flow-suppression interface command displays the traffic suppression configuration on an interface.
Example
# Display the traffic suppression configuration on GigabitEthernet 0/0/1.
<AC6605> display flow-suppression interface gigabitethernet 0/0/1 storm type rate mode set rate value ------------------------------------------------------------------------------- unknown-unicast pps pps: 1260(packet/s) multicast pps pps: 2520(packet/s) broadcast pps pps: 1260(packet/s) -------------------------------------------------------------------------------
