Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
stub-router (OSPFv3)
Function
The stub-router command configures a device as stub router.
The undo stub-router command restores the default configuration.
By default, no stub router exists.
Parameters
| Parameter | Description | Value |
|---|---|---|
| on-startup [ interval ] | Specifies the interval during which a device acts as
a stub router when the device is restarted or faulty.
|
The value is an integer ranging from 5 to 65535, in seconds. By default, it is 500 seconds. |
Usage Guidelines
After the stub-router command is configured on a wireless access controller, the stub router informs other OSPFv3 devices not to use this stub router for data forwarding by increasing the metrics of the links in the LSA generated by the wireless access controller. Since the metric is not infinite, the devices to this stub router still exist. The metrics of all links in the device LSAs generated by the stub router are set to 65535.
