Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
terminal trapping
Function
The terminal trapping command enables trap display on the user terminal.
The undo terminal trapping command disables trap display on the user terminal.
By default, trap display is enabled on the user terminal.
Usage Guidelines
Usage Scenario
To view traps on a terminal, run the terminal trapping command to enable trap display on the user terminal.
Prerequisites
The terminal monitor command has been executed to enable display of logs, traps, and debugging message output on the user terminal.
