poe max-power (AP system profile view)
Usage Guidelines
Usage Scenarios
By default, the system automatically obtains the maximum PoE power supported by the AP. You can run the poe max-power command to set the maximum output power to ensure stable PoE power supply when the total power of the AP is insufficient.
Precautions
If the maximum output power that you set is smaller than the total power required by PDs, PDs with lower priority are powered off.
The configured maximum output power must be smaller than the total power that the PoE power supply provides for PDs.
This command takes effect only on the AP2051DN-E, R251D-E, AP8082DN, AP8182DN, AP4050DN-E, AP4050DN-HD, AP7050DN-E, AP2050DN-E, R250D-E, AD9431DN-24X, AD9430DN-24, and AD9430DN-12.