Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
broadcast-suppression auto-detect (AP system profile view)
Function
The broadcast-suppression auto-detect command configures the rate limit for broadcast packets during intelligent flow control.
The undo broadcast-suppression auto-detect command restores the default rate limit for broadcast packets during intelligent flow control.
By default, the rate limit for broadcast packets is 256 pps.
Usage Guidelines
When there are a large number of broadcast, multicast, and unknown unicast packets, the CPU becomes busy processing these packets. When the traffic rate reaches the rate limit for intelligent traffic control, the device limits the rates of broadcast, multicast, and unknown unicast packets. You can run this command to specify a rate limit as required.
