traffic behavior
Function
The traffic behavior command creates a traffic behavior and displays the traffic behavior view, or enters the existing traffic behavior view.
The undo traffic behavior command deletes a traffic behavior.
By default, a traffic behavior be exists in the system.
Usage Guidelines
Usage Scenario
A traffic classifier is used to differentiate services and must be associated with a flow control or resource allocation action such as packet filtering, traffic policing, and re-marking. These actions constitute a traffic behavior. The traffic behavior command creates a traffic behavior.
Follow-up Procedure
Configure an action in the traffic behavior view. For example, run the car (traffic behavior view) command to configure a traffic policing action.
Precautions
The system has default traffic behavior be. This traffic behavior cannot be deleted or modified.
To delete a traffic behavior, unbind the traffic policy containing the traffic behavior from an interface and unbind the traffic behavior from a traffic classifier in the traffic policy. To modify a traffic behavior, you do not need to unbind the traffic policy containing the traffic behavior from an interface.
A maximum of 256 traffic behaviors can be created on the AC6605/ACU2/AC6800V/AC6805 and a maximum of 32 traffic behaviors can be created on the AC6507S, AC6508, or AC6005. Multiple traffic actions can be configured in a traffic behavior.
