Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display traffic-filter applied-record
Function
The display traffic-filter applied-record command displays the record about ACL-based packet filtering.
Usage Guidelines
The display traffic-filter applied-record command displays the record about ACL-based packet filtering. The command output helps you check the ACL-based packet filtering configuration and locate faults.
Example
# Display the record about ACL-based packet filtering.
<AC6605> display traffic-filter applied-record ------------------------------------------------------------------- Interface Direction AppliedRecord ------------------------------------------------------------------- Vlanif100 inbound IPv4 ACL 3000 ------------------------------------------------------------------- Total:1 ------------------------------------------------------------------- Traffic profile Direction AppliedRecord ------------------------------------------------------------------- p1 inbound IPv4 ACL 3000 p2 inbound IPv6 ACL 3001 ------------------------------------------------------------------- Total:2
Table 25-18 Description of the display traffic-filter applied-record command
output
Item |
Description |
|---|---|
Interface |
Interface to which ACL-based packet filtering is applied. |
Direction |
Direction in which ACL-based packet filtering is configured:
|
AppliedRecord |
Record about ACL-based packet filtering. |
Traffic profile |
Traffic profile to which ACL-based packet filtering is applied. |
