multicast invalid-packet
Function
The multicast invalid-packet command sets the maximum number of invalid multicast protocol packets that can be stored on the wireless access controller.
The undo multicast invalid-packet command deletes the set maximum number of invalid multicast protocol packets that can be stored on the wireless access controller.
By default, the wireless access controller can save a maximum of 10 invalid packets for each specific multicast protocol.
Format
multicast invalid-packet { igmp | msdp | pim } max-count max-number
undo multicast invalid-packet { igmp | msdp | pim }
Parameters
Parameter | Description | Value |
---|---|---|
igmp | Sets the maximum number of invalid IGMP messages. | - |
msdp | Sets the maximum number of invalid MSDP messages. | - |
pim | Sets the maximum number of invalid PIM messages. | - |
max-count max-number | Sets the maximum number of invalid multicast protocol packets that can be stored on a device. | The value is an integer ranging from 1 to 100. |
Usage Guidelines
If multicast entries fail to be generated or peer relationships fail to be set up, you can enable the wireless access controller to store invalid multicast protocol packets and view statistics and details of the invalid multicast protocol packets. Based on the command output, you can locate and rectify faults.