Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
BFD Configuration Commands
On the ACU2, only the VLANIF interface can be bound to the BFD session. The ACU2 does not support binding between the BFD session and the XGE or Eth-Trunk interface.
- bfd
- bfd bind peer-ip
- bfd bind peer-ip default-ip
- bfd bind peer-ip source-ip auto
- bfd one-arm-echo
- bfd bfd-name
- bfd session nonexistent-config-check
- commit
- dampening timer-interval
- default-ip-address
- delay-up
- description (BFD session view)
- detect-multiplier
- discriminator
- display bfd configuration
- display bfd interface
- display bfd session
- display bfd statistics
- display bfd statistics session
- display bfd ttl
- display snmp-agent trap feature-name bfd all
- min-echo-rx-interval
- min-rx-interval
- min-tx-interval
- multi-hop
- peer-ip ttl
- process-interface-status
- reset bfd statistics
- shutdown (BFD session view)
- snmp-agent bfd trap-interval
- snmp-agent trap enable feature-name bfd
- tos-exp
- wtr
