Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
dhcpv6 pool
Function
The dhcpv6 pool command creates an IPv6/IPv6 PD address pool or displays the IPv6/IPv6 PD address pool view.
The undo dhcpv6 pool command deletes the created IPv6/IPv6 PD address pool.
By default, no IPv6/IPv6 PD address pool is created.
Usage Guidelines
The dhcpv6 pool command is used on DHCPv6/DHCPv6 PD servers. When configuring the DHCPv6/DHCPv6 PD server, run the dhcpv6 pool command to create an IPv6/IPv6 PD address pool for the DHCPv6/DHCPv6 PD server to assign IPv6 addresses or prefixes to DHCPv6/DHCPv6 PD clients.
The total number of IPv6 and IPv6 PD address pools that can be configured varies according to the AC models:
- AC6605: 128
- AC6005: 64
- ACU2: 256
- AC6800V: 256
