display ospfv3 vlink
Parameters
| Parameter | Description | Value |
|---|---|---|
| process-id | Identifies the OSPFv3 process ID. | The value ranges from 1 to 65535. |
Example
# Display OSPFv3 virtual links.
<AC6605> display ospfv3 vlink
OSPFv3 Process (100)
Virtual Link VLINK1 to router 2.2.2.2 is up
Transit area 0.0.0.1 via interface Vlanif10, instance ID 0
Local address 2001:db8:1::1
Remote address 2001:db8:2::2
Interface ID 0x80000001
VirtualInterface Event: 1
VirtualInterface LsaCount: 0
VirtualInterface Lsa Checksum: 0x0
Transmit Delay is 1 sec, State Point-To-Point, Cost 1562
Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:04
Adjacency state Init
Item |
Description |
|---|---|
Transit area |
If the current interface is the V-link interface, the transfer area ID is displayed |
via interface |
Interface of the V-link |
instance ID |
Instance ID |
Local address |
Local address |
Remote address |
Remote address |
Interface ID |
Interface ID |
VirtualInterface Event |
Number of interface events of the V-link |
VirtualInterface LsaCount |
Number of LSAs sent from all V-link interfaces |
VirtualInterface Lsa Checksum |
Checksum of the LSA sent from the V-link interface |
Transmit Delay |
Transmission delay of the interface |
State |
Interface state:
|
Cost |
Cost |
Timer intervals |
Timers:
|
Adjacency state |
State of the V-link:
|
