Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
engine pass-through enable
Function
The engine pass-through enable command enables the pass-through mode of the engine.
The undo engine pass-through enable command disables the pass-through mode of the engine.
Usage Guidelines
The pass-through mode of the engine is disabled by default.
After the pass-through mode of the engine is enabled, the system generates events, such as debugging information or log during service processing, but does not perform actual actions. Even a block action is configured for a service, the system does not block traffic but records the service event state.
