Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display wmi status
Example
# Display the WMI configuration status.
<AC6605> display wmi status
Config status
Server : 10.1.1.1:10032
Max packet size : 5120Bytes
Report interval : 60s
Connection : heartbeat 3min; retry interval 5min; retry count 0.
Statistics info
Success packet(count/bytes): 0/0
Fail packet(count/bytes) : 0/0
------------------------------------------------------------------------------
Data-Type Enable Coll-Intv(s) Trigger Send-Records
------------------------------------------------------------------------------
device-data 1 10 0 0
interface-data 1 60 0 0
log-data 0 300 0 0
security-data 1 300 0 0
application-statistics-data 1 300 0 0
cpcar-data 1 300 0 0
------------------------------------------------------------------------------
WMI TCP clients status:
-----------------------------------------------------------------------------------
Index Connect-Time Address-Info Rx-Packets Rx-Bytes Rx-Packets-Drop
===================================================================================
===================================================================================
Info: Server2 has not been configured.
Table 26-61 Description of the display wmi status command
output
Item |
Description |
|---|---|
| Server | Destination to which the AC reports collected information. |
| Max packet size | Maximum size of packets containing information reported by the AC to the WMI server. |
| Report interval | Interval at which the AC reports collected information to the WMI server. |
| Connection | Connection parameters between the AC and WMI server, including the heartbeat interval, reconnection interval, and number of reconnection attempts. |
| Statistics info | Statistics information. |
| Success packet(count/bytes) | Number of times data is successfully reported, and size of reported data. |
| Fail packet(count/bytes) | Number of times data fails to be reported, and size of data that fails to be reported. |
| Data-Type | Type of collected data.
|
| Enable | Whether the AC is enabled to report collected information to the WMI server.
|
| Coll-Intv(s) | Data collection interval. |
| Trigger | Number of times that data collection is triggered. |
| Send-Records | Number of times that reported data is recorded. |
| Index | Index. |
| Connect-Time | Time for setting up a connection between the AP and proxy device. |
| Address-Info | Address information, including the IP address and port number of the AP. |
| Rx-Packets | Number of packets on the proxy device received from the AP. |
| Rx-Bytes | Number of bytes on the proxy device received from the AP. |
| Rx-Packets-Drop | Number of discarded packets on the proxy device among those received from the AP. |
