Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
reset isis all
Parameters
| Parameter | Description | Value |
|---|---|---|
| process-id | Specifies the ID of an IS-IS process to be restarted. | The value is an integer that ranges from 1 to 65535. |
| graceful-restart | Restarts an IS-IS process in GR mode. | - |
Usage Guidelines
Usage Scenario![]()
The reset isis all command is used when LSPs need to be updated immediately. For example, after the area-authentication-mode and domain-authentication-mode commands are used, you can run the reset isis all command to clear old LSPs.
Precautions
Restarting IS-IS processes may interrupt services. Therefore, confirm the action before running the reset isis all command.
