sta-load-balance static-group
Function
The sta-load-balance static-group command creates a static load balancing group and displays the static load balancing group view.
The undo sta-load-balance static-group command deletes a static load balancing group.
By default, no static load balancing group is configured.
Format
sta-load-balance static-group name group-name
undo sta-load-balance static-group { name group-name | all }
Usage Guidelines
In static load balancing mode, APs providing the same services are manually added to a load balancing group. When a STA needs to access a WLAN, it sends an Association Request packet to an AC through an AP. The AC determines whether to allow access from the STA according to the load balancing algorithm.
To configure static load balancing, run the sta-load-balance static-group command in the WLAN view to create a static load balancing group and member command to add APs to the group.
