Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
reset bgp flapping-count
Parameters
| Parameter | Description | Value |
|---|---|---|
| ipv4-address | Specifies the IPv4 address of a BGP peer. | It is in dotted decimal notation. |
| ipv6 | Clears the flapping count of a specified BGP IPv6 peer. | - |
| ipv6-address | Specifies the IPv6 address of a BGP peer. | The prefix is a 32-digit hexadecimal number, in the format of X:X:X:X:X:X:X:X. |
Usage Guidelines
Usage Scenario
BGP peer flapping affects the stability of a BGP network and BGP route convergence.
The reset bgp flapping-count command can be used to clear the flapping account of a BGP peer. This allows the wireless access controller to re-collect the flapping statistics of a peer to locate BGP network problems.
Precautions
After the reset bgp flapping-count command is run, the flapping statistics of BGP peers are reset and cannot be displayed.
Follow-up Procedure
After the reset bgp flapping-count command is used to clear the statistics count of a specified BGP peer, run the display bgp peer command to display the flapping count of BGP peers and locate BGP network problems.
