display autosave configuration
Function
The display autosave configuration command displays the automatic save parameters of the configuration data.
Usage Guidelines
Usage Scenario
Run this command when you want to check whether the function for automatically saving configuration data is enabled, enable or disable the automatic save function, and modify the automatic save interval or time.
Precautions
- Run the autosave time command to set the time for automatically saving system configuration data.
- Run the autosave interval command to set the interval for automatically saving system configuration data.
- The frequent data save operation affects the lifespan of the system storage device. Do not set the automatic save interval to less than 1 hour. The automatic save interval of 24 hours or greater is recommended.
Example
# Display the automatic save parameters configured in the system.
<AC6605> display autosave configuration
System autosave interval switch: on
Autosave interval: 120 minutes
Autosave type: configuration file
System autosave modified configuration switch: on
Autosave interval: 30 minutes
Autosave type: configuration file
System autosave time switch: off
Autosave time: 12:20:30
Autosave type: configuration file
Item |
Description |
|---|---|
System autosave interval switch |
State of the automatic save function. |
Autosave interval |
Automatic save interval. |
Autosave type |
Type of the file that is automatically saved. |
System autosave modified configuration switch |
State of the function for automatically saving modified data. |
System autosave time switch |
State of the function for saving configuration data at the preset time. |
Autosave time |
Automatic save time. |
