Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
sftp ap
Usage Guidelines
Usage Scenario
You can run the sftp ap command to log in to an AP through SFTP on the AC. You only need to specify the AP's name or ID but does not need to enter the AP's IP address.
Pre-configuration Tasks
First-time authentication has been enabled on the SSH client using the ssh client first-time enable command.
Example
# Use the name to log in to the AP through SFTP.
<AC6605> system-view [AC6605] sftp ap ap-name area_1 Trying 192.168.109.253 ... Press CTRL+K to abort Connected to 192.168.109.253 ... The server is not authenticated. Continue to access it? (y/n)[n]:y Save the server's public key? (y/n)[n]:y The server's public key will be saved with the name 192.168.109.253. Please wait... Info: Current mode: Fit (managed by the AC). Info: You are advised to change the password to ensure security. sftp-client>
