Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
rip mib-binding
Function
The rip mib-binding command sets the binding between the Management Information Base (MIB) and RIP process ID, and specifies the ID of the RIP process that receives SNMP requests.
The undo rip mib-binding command cancels the binding.
By default, there is no binding between the Management Information Base and RIP process ID.
Parameters
| Parameter | Description | Value |
|---|---|---|
| process-id | Specifies the ID of a RIP process. | The value is an integer ranging from 1 to 65535. The default value is 1. |
Usage Guidelines
Usage Scenario
All SNMP requests are sent to the bound RIP process.
Prerequisites
A RIP process has been created using the rip command.
