Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ipv6 icmp redirect send
Function
The ipv6 icmp redirect send command enables the system to send ICMPv6 Redirect packets.
The undo ipv6 icmp redirect send command disables the system from sending ICMPv6 Redirect packets.
By default, the system sends ICMPv6 Redirect packets.
Usage Guidelines
Usage Scenario
When detecting that the inbound interface and outbound interface of a packet are the same, a wireless access controller sends an ICMPv6 Redirect packet. However, frequently sending ICMPv6 Redirect packets degrades network performance. To improve network performance and security, run the undo ipv6 icmp redirect send command to disable the system from sending ICMPv6 Redirect packets.