No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
poe power-threshold

poe power-threshold

Function

The poe power-threshold command sets the alarm threshold of the PoE power consumption percentage.

The undo poe power-threshold command restores the default alarm threshold of the PoE power consumption percentage.

The default alarm threshold of the PoE power consumption percentage is 100% for the AD9431DN-24X and 90% for other APs.

Only the AP8082DN, AP8182DN, AP4050DN-E, AP4050DN-HD, AP7050DN-E, AD9431DN-24X, AD9430DN-24, and AD9430DN-12 support this command.

Format

poe power-threshold threshold-value [ slot slot-id ]

undo poe power-threshold [ threshold-value slot slot-id | slot slot-id ]

Parameters

Parameter

Description

Value

threshold-value

Specifies the alarm threshold of the PoE power consumption percentage. When the power consumption reaches this value, a PoE power alarm is generated.

The value is an integer that ranges from 0 to 100, in percentage.

slot slot-id

Specifies the slot ID of the card.

The value is 0, indicating the MPU of the device.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

You can run this command to set the alarm threshold of the PoE power consumption percentage. If the total PoE power is 369.6 W and the alarm threshold is 90%, an alarm is generated when the power consumption is greater than 332.64 W. When the power consumption falls below 332.64 W, the alarm is cleared.

Example

# Set the alarm threshold of the PoE power consumption percentage to 80%.

<Huawei> system-view
[Huawei] poe power-threshold 80
Related Topics
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 211679

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next