No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
display event

display event

Function

The display event command displays events on the device.

Format

display event

Parameters

None

Views

All views

Default Level

1: Monitoring level

Usage Guidelines

None

Example

# Display events on the device.

<Huawei> display event
A/B/C/D/E/F/G/H/I/J                                                             
A=Sequence, B=RootKindFlag(Independent|RootCause|nonRootCause)                  
C=Generating time, D=Clearing time                                              
E=ID, F=Name, G=Level, H=State                                                  
I=Description information for locating(Para info, Reason info)                  
J=RootCause alarm sequence(Only for nonRootCause alarm)                         
                                                                                
  1/Independent/2011-08-29 16:36:55/-/0xc0dc2000/entConfigChange/Warning/Start/O
ID 1.3.6.1.2.1.47.2.0.1 Entity MIB change.                                      
  2/Independent/2011-08-29 16:37:32/-/0xc0dc2000/entConfigChange/Warning/Start/O
ID 1.3.6.1.2.1.47.2.0.1 Entity MIB change.                                      
Table 4-18  Description of the display event command output

Item

Description

A/B/C/D/E/F/G/H/I/J

Event display format

A=Sequence

Sequence number of an event

B=RootKindFlag(Independent|RootCause|nonRootCause)

Flag indicating a root-cause alarm or a non-root-cause alarm (The value of this field is Independent for any event.)

C=Generating time

Time when the event is generated

D=Clearing time

Time when the event is cleared (for non-root-cause alarms only)

E=ID

Event ID

F=Name

Event name

G=Level

Event level

H=State

Event status:

  • Start
  • End

I=Description information for locating(Para info, Reason info)

Description of an event, including parameters of the event and the reason why the event was triggered.

J=RootCause alarm sequence(Only for nonRootCause alarm)

This parameter is valid only for alarms.

Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207838

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next