No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
service-vlan (VAP profile view)

service-vlan (VAP profile view)


The service-vlan command configures a service VLAN for a VAP.

The undo service-vlan command restores the default service VLAN of a VAP.

By default, VLAN 1 is the service VLAN of a VAP.


service-vlan vlan-id vlan-id

undo service-vlan





vlan-id vlan-id

Sets the service VLAN of a VAP to a specific VLAN.

The value is an integer that ranges from 1 to 4094.


VAP profile view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

Each VAP has a service VLAN. Layer 2 data packets delivered from a VAP to an AP carry the service VLAN ID.


Modifying the service VLAN of a VAP will interrupt services of STAs connected to the VAP. Exercise caution when you run the command.


# Set the service VLAN to VLAN2 in the VAP profile vap1.

<Huawei> system-view
[Huawei] wlan 
[Huawei-wlan-view] vap-profile name vap1
[Huawei-wlan-vap-prof-vap1] service-vlan vlan-id 2
Related Topics
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 196791

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next