Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
air-scan-profile (radio profile view)
Function
The air-scan-profile command binds an air scan profile to a radio profile.
The undo air-scan-profile command unbinds an air scan profile from a radio profile.
By default, the air scan profile default is bound to a radio profile.
Usage Guidelines
After you create an air scan profile using the air-scan-profile command, bind it to a radio profile so that the air scan profile can take effect.
Example
# Bind the air scan profile air-scan01 to the radio profile default.
<Huawei> system-view [Huawei] wlan [Huawei-wlan-view] air-scan-profile name air-scan01 [Huawei-wlan-air-scan-prof-air-scan01] quit [Huawei-wlan-view] radio-2g-profile name default [Huawei-wlan-radio-2g-prof-default] air-scan-profile air-scan01
Related Topics
Previous
