No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ntp-service discard

ntp-service discard

Function

The ntp-service discard command sets the minimum inter-packet interval and the average inter-packet interval of NTP.

The undo ntp-service discard command restores the minimum inter-packet interval and the average inter-packet interval of NTP to the default values.

By default, the minimum inter-packet interval is set to the first power of 2 in seconds, namely, 2 seconds, and the average inter-packet interval is set to the fifth power of 2 in seconds, namely, 32 seconds.

Format

ntp-service discard { min-interval min-interval-val | avg-interval avg-interval-val } *

undo ntp-service discard

Parameters

Parameter Description Value
min-interval min-interval-val

Specifies the minimum inter-packet interval of NTP.

The actual value of the minimum inter-packet interval of NTP is the value obtained by raising 2 to the power of min-interval-val, expressed in seconds.

The value of min-interval-val is an integer that ranges from 1 to 8.
avg-interval avg-interval-val

Specifies the average inter-packet interval of NTP.

The actual value of the average inter-packet interval of NTP is the value obtained by raising 2 to the power of avg-interval-val, expressed in seconds.

The value of avg-interval-val is an integer that ranges from 1 to 8.

Views

System view

Default Level

2: Configuration level

Usage Guidelines

The minimum inter-packet interval and the average inter-packet interval of NTP are set using the ntp-service discard command. To generate kiss code RATE, we need to set the minimum inter-packet interval and the average inter-packet interval of NTP.

Example

# Set both the minimum inter-packet interval and the average inter-packet interval of NTP to the fourth power of 2, expressed in seconds, namely, 16 seconds.

<Huawei> system-view
[Huawei] ntp-service discard min-interval 4 avg-interval 4
Translation
Download
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207476

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next