No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwtacacs enable

hwtacacs enable


The hwtacacs enable command enables Huawei Terminal Access Controller Access Control System (HWTACACS).

The undo hwtacacs enable command disables HWTACACS.

By default, HWTACACS is enabled.


hwtacacs enable

undo hwtacacs enable




System view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

To use HWTACACS authentication, authorization, or accounting, run the hwtacacs enable command to enable the HWTACACS function.


If the undo hwtacacs enable command is run when a user is performing HWTACACS authentication, authorization, or accounting, the command does not take effect.


# Disable HWTACACS.

<Huawei> system-view
[Huawei] undo hwtacacs enable
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 203343

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next