No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



The reboot command restarts the device.


reboot [ fast ]


Parameter Description Value
fast Fast restarts the device. In fast restart mode, the configuration file is not saved. -


User view

Default Level

3: Management level

Usage Guidelines

Usage Scenario

This command functions in the same way as a power recycle operation (power off and then restart the device). The command enables you to restart the device remotely.

  • After the reboot command is run, if the current configuration is modified, the system displays a message asking you whether to save the configuration before a restart.

    Info: The system is comparing the configuration, please wait................
    Warning: All the configuration will be saved to the next startup configuration. Continue ? [y/n]: Y
  • After the reboot fast command is run, the system restarts quickly without displaying any message and the configuration is lost.

  • After the reboot fast command is run, the system displays the following message:
    Info: system is sync data now, please wait ...

    The message indicates that the system is synchronizing internal data.


  • If you do not respond to the displayed message within the timeout period after running this command, the system will return to the user view and the device will not be restarted.

  • This command interrupts services on the entire device. Therefore, do not use this command when the device is running properly.

  • Before restarting the device, ensure that the configuration file has been saved.


# Restart the device.

<Huawei> reboot

# Restart the device quickly.

<Huawei> reboot fast
System will reboot! Continue ? [y/n]: Y
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 207494

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next