No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Fat AP and Cloud AP V200R010C00 Command Reference

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
igmp-snooping enable (VLAN view)

igmp-snooping enable (VLAN view)


The igmp-snooping enable command enables IGMP snooping in a VLAN.

The undo igmp-snooping enable command disables IGMP snooping in a VLAN.

By default, IGMP snooping is disabled in a VLAN.


igmp-snooping enable

undo igmp-snooping enable




VLAN view

Default Level

2: Configuration level

Usage Guidelines

Usage Scenario

By default, IGMP snooping is disabled in a VLAN after IGMP snooping is enabled in the system view. To enable IGMP snooping in a VLAN, run the igmp-snooping enable command in the VLAN view.


IGMP snooping has been enabled globally using the igmp-snooping enable (system view) command.

Configuration Impact

After IGMP snooping is enabled in a VLAN, this function takes effect only on interfaces in this VLAN.


# Enable IGMP snooping in VLAN 2.

<Huawei> system-view
[Huawei] igmp-snooping enable
[Huawei] vlan 2
[Huawei-vlan2] igmp-snooping enable
Updated: 2019-11-21

Document ID: EDOC1100064352

Views: 210111

Downloads: 122

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next